Datacom Systems D56 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 69)

–69–

Section 19. ZONE LISTS (

✱

81 Menu Mode)

While in program mode, press ✱

81 to enter Zone List Menu Mode. This

mode is used to program zone lists for output devices (programmed in

✱

menu mode) and/or for defining a common zone. Refer to the Programming

Form worksheet for

✱

81 Mode.

After entering ✱81, the following prompts are displayed.

Zone List Displays

Zone List No.

(00 = Quit) 01

Enter the Zone List Number 01, 02, 03, or 04 to program (or 00 to end these

entries). Press the [✱] key to advance.

In the following displays, zone list 01 has been selected for programming.

01 Enter Zn Num.

(00 = Quit) 00

Enter each zone number to add to the zone list by first entering the zone

number, then the [✱] key (example, 01✱, 02✱, 03✱). After all zones desired

are entered, press 00 to advance.

01 Del Zn List?

0 = No 1 = Yes 0

To delete the zone list, enter 1 (Yes). All zones in the zone list will be deleted

automatically. and programming will return to the first screen.

To save the zone list, enter 0 (No) to advance.

01 Delete Zone?

0 = No 1 = Yes 0

To save the entire zone list, enter 0 (No) and programming will return to the

first screen.

To delete a zone or zones in a zone list enter 1 (Yes) to advance.

01 Zn to Delete?

(00 = Quit) 00

Enter each zone to be deleted from the list, followed by the [✱] key. After all

zones to be deleted are entered, enter 00 to return to the first screen so that

another list can be programmed, if desired.

NOTES:

• Any list may include any or all of the system's zone numbers.

• A zone list can be assigned to more than one output relay.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 103 104

Keine Kommentare

Datacom Systems D56 Anleitung zur Fehlerbehebung Seite 69