Datacom Systems VS series Multi-Link Bedienungsanleitung Seite 21

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 28
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 20
Datacom Systems Inc
VERSAstream
1000 • USERguide
21
To connect the VERSAstream
Multi-Link Aggregator, refer to Figure 12 or Figure
13 and follow these steps:
1. Two power supplies are provided. Use of the second power supply is strongly
recommended to assure uninterrupted monitoring. Connect both power supply
barrel connectors into the power 1 and 2 ports, respectively, of the VERSA-
stream
. Plug the power supplies into the external power source, furthermore,
connecting the second power supply to a different external power source circuit
than the first power supply eliminates power as a single point of failure. The
POWER 1 and 2 LEDs illuminate indicating power 1 and 2, respectively, are on.
Either LED not illuminated indicates a defective power source and immediate
replacement is required to insure redundant power integrity.
2. Connect network cables to the VERSAstream
NETWORK
RJ45 ports. The
NET-
WORK
RJ45 Link LED is solid green indicating link has been established
between the respective
NETWORK
port and network device. See Table 2 for RJ45
LED display codes. The LED is flashing green when data is passed from the
respective network device to the network port.
3. Connect analysis devices to the VERSAstream
MONITOR
ports. Two DRL494–2m
cables are provided to connect analysis SC ports to the
MONITOR
duplex-LC ports.
Either, the
MONITOR
duplex-LC Link LED or the
MONITOR
RJ45 Link LED is solid
green when link has been established between the respective monitor port and analy-
sis device. The LED is flashing green when data is passed from the respective moni-
tor port to the analysis device.
1,000 Mbs
100 Mbs
10 Mbs
Green
Orange
OFF
RJ45 LED Display Code
Link
Data
Code
Left LED
Solid Green
Flashing Green
Code
WITH LINK OR DATA
Right LED
Table 2 - RJ45 LED Display Codes
Seitenansicht 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare